Seneca EASY USB

Description:

TheEASY-USB is a serial communication converter that converts the signal from the USB to a standard UART TTL signal and vice versa.

The EASY-USB can be used to configure a Seneca device that has an UART TTL serial port.

Through the installation of a provided driver for your sOS, the EASY-USB will be configured as a standard communication port, this allows to use the EASY-USB with any configuration software that exploits the serial standard port(COM1,COM2,etc).

Specification:

• Power supply: By PC 5V @ 100 mA
• Protecion degree: IP20
• UART TTL interface: RJ11 connector, baud rate from 300 bps to 250 Kbps
• USB interface: USB port type A compliance to 1.0, 1.1, 2.0 standard specification
• Dimension: 84 x 21 x 17 mm
• Supported O.S.: Windows 98, 98SE, ME, 2000, Server2003, XP, indows XP 64bit, Windows Vista, Windows XP embedded, Windows CE.net 4.2 & 5.0, Mac OS 8, 9, OS-X, Linux Kernel 2.4.20 or later version

For additional information please refer to the documentation below.