Eurotherm 3216i 1/16 DIN Indicator and Alarm Unit

Online Catalogue | Eurotherm | Eurotherm Indicators | Eurotherm 3200i Series Indicators & Alarm Units | Eurotherm 3216i 1/16 DIN Indicator and Alarm Unit

Eurotherm 3216i Indicator and Alarm Unit

Price: £164.00 (Excluding VAT at 20%)

Quantity:

Function

Supply Voltage

Outputs 1, 2 & 3

AA Relay

Options

Fascia Colour

Product Language

Manual Language

Input Adapter

Extended Warranty

Certificates

FREE 12 month product support and FREE configuration included as standard

Overview

The 3216i indicator offers accurate indication and alarming of temperature and process measurements. Process interlocks, including over temperature furnace limits, are implemented using relay output channels.

The emphasis is on ease of use. A simple 'QuickStart' code is used to configure all the functions essential for indication and protecting your process. This includes input sensor type, measurement range and alarms making 'Out of the Box' operation truly achieveable.

In operator mode every parameter has a scrolling text message describing its function and is available in English, German, French, Spanish or Italian. More advanced features are configured using iTools with a PC based configuration wizard - giving an easy to use, instructive guide to all the functions in the indicator.

Universal input

Strain gauge input

Changeover relay

PV Retransmission

Scrolling text messages

Parameter help text

Recipes

Modbus comms

Features

QuickStart set-up enabling 'out of the box' operation
Universal input - A wide range of temperature and process inputs can be selected using thefront panel push buttons without the need for any hardware change. This provides easy on-site set up.
Strain gauge input - Melt pressure and weigh scale inputs can be energised from an internal10Vdc transducer supply. An automatic shunt calibration routine is provided to remove zero and span offsets. The display on the 32h8i canshow a full 5 digit value.
Process alarms - Four internal alarm setpoints are provided. They can be used to energiseup to three relay outputs, which can be latched if required. A specialmode, known as ‘Alarm Blocking’, is available which ensures that when theunit is powered up an alarm must first enter a good state before the alarmbecomes active. This is particularly useful for low alarms which can beblocked while the process is warming up.
Custom text messaging - Custom messages can be created with iTools and downloaded to the 3200ito display when an event, alarm or process condition occurs. This providesthe operator with good visibility of what is happening in the process andprovides messages that they can understand and act upon.
Recipes - iTools recipes can be created that can be used to change the operatingparameters of the 3200i simply by selecting a recipe using the 3200ipush buttons. This is very useful where multiple products are processedbut require different parameters to be set. It can also be used tochange the set-up of a indicator therefore allowing one unit to be usedas a spare for multiple applications.
Analogue retransmission - The measured process value can be retransmitted as either a mA orvoltage signal with a selection of outputs including 4-20mA and 0-10Vdc. In the 32h8i this signal is isolated from all other electronicswithin the unit.
Digital communication - All units support both EIA232 and EIA485 communication using theModbus protocol as a slave device. It is also possible to digitallyretransmit one parameter using a Modbus broadcast to all otherModbus devices on the network
Configuration adaptor - PC configuration to all 3200i indicators can be achieved by using aconfiguration adaptor. It provides iTools with the ability to communicate with and configure devices without any power beingconnected.

Applications

Temperature & process indication
Level/pressure/flow
Process protection
Heat reatment - furnace over temperature
Plastics - extrusion melt pressure
Weighting platform

Specification

For full specification please download the PDF datasheets and manuals available at the bottom of this page.

Dimensions

For full dimensions, please download the PDF datasheets and manuals available at the bottom of this page.

Ordering Code

For full ordering code, please download the PDF datasheets and manuals available at the bottom of this page.

Online Catalogue | Eurotherm | Eurotherm Indicators | Eurotherm 3200i Series Indicators & Alarm Units | Eurotherm 3216i 1/16 DIN Indicator and Alarm Unit

Items:
Value:

Find us on the following social networks:

FREE CONFIGURATION & TECHNICAL SUPPORT INCLUDED WITH MOST ORDERS
Click here for more details

FREE ISS Ltd. Mug With All Orders Over £250.00 GBP