FoodPro

Online Catalogue | Fluke | FoodPro Thermometer Series | FoodPro

FoodPro Infrared Food Thermometer

Price: £69.00 (Excluding VAT at 20%)

Quantity:

FREE 12 month product support and FREE configuration included as standard

Fluke brings its test and measurement equipment expertise to the foodservice industry with contact and non-contact temperature measurement solutions. The new Fluke FoodPro Thermometer Series provides a complete temperature measurement and monitoring solution for foodservice professionals. It includes two useful temperature inspection tools, which are designed to enable foodservice professionals to quickly and accurately measure food product temperatures and to help detect potential food safety problems.

The Fluke FoodPro non-contact thermometer is the first line of defense against improper receiving, storage and holding temperatures. Using an infrared measurement technique, the highly accurate FoodPro quickly reads surface temperatures, allowing workers to make rapid and frequent temperature measurements faster than contact units and without fear of cross contamination. The easy-to-see illumination light shows you the measurement area.

Both FoodPro Series thermometers are hand-washable and feature unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.

Useful applications

Receiving: Use FoodPro Series thermometers to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.
Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures.
Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements.
Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs.
Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste.

FoodPro

Fluke FoodPro Food Safety Thermometer

The easy-to-use and highly accurate Fluke FoodPro non-contact thermometer instantly measures surface temperature, allowing users to make rapid and frequent non-contact temperature measurements without risk of cross contamination.

Infrared temperature range from -35 to 275 ºC
HACCP check lights for instant recognition of safe/unsafe temperatures
LED target illumination highlights the entire measurement spot for accurate targeting
Hand washable (IP54 sealed)

Infrared Specifications

Temperature

-30 ºC to 200 ºC

Accuracy

	(Assumes ambient operating temperature of 23 ºC ±2 º)
	Between 0 ºC and 65 ºC: ±1 ºC
	Below 0 ºC : ±1 º ±0.1 degree/degree
	Above 65 ºC): ±1.5 % of reading

Response time

<500 ms after initial reading

Spectral Response

8-14 microns

Emissivity

Pre-set for foodservice applications

Distance to spot size/Optical Resolution (D:S)

2.5:1 @ 90 % energy, typical

Typical working range (target illumination)

˜25 mm to 250 mm

Minimum target size

12 mm ø

Illumination to IR channel offset

13 mm

Operational Specifications (both)

Repeatability

Within accuracy specifications of the unit

Ambient operating range

0 ºC to 50 ºC

Relative Humidity

90 % (+/- 5 %) RH non condensing @ 30 ºC

Storage Temperature

-20 ºC to 60 ºC

Weight

FoodPro	100 g (with battery)
FoodPro Plus	150 g (with battery)

Dimensions

FoodPro	150 mm x 30 mm x50 mm
FoodPro Plus	165 mm x 32 mm x 50 mm

Power, battery life

FoodPro	1 AA alkaline
FoodPro Plus	9 V alkaline

Battery Life

alkaline

10 hours minimum @ 23 ºC

Target illumination

High Brightness LED

Display Resolution

FoodPro	4 digits, 0.2 ºC
FoodPro Plus	4 digits, 0.1 ºC

Displayhold (7seconds)

FoodPro	yes
FoodPro Plus	yes

LCD backlit display

FoodPro	no
FoodPro Plus	yes

Temperature display

FoodPro	4 digits, 0.2 ºC resolution
FoodPro Plus	4 digits, 0.1 ºC resolution

Maximum temperature displayed

FoodPro	no
FoodPro Plus	yes

Timer

FoodPro	no
FoodPro Plus	yes

Environmental Data

IP54 sealing (hand-washable, non-submersible)

Other Specifications (both)

Calibration Certificate

FoodPro Plus

Calibration accuracy with NIST and DKD traceability

Standards

Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible)

Certifications

CE NSF

Warranty

2 years

Options/Accessories

FoodPro Plus

Replacement probe

At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody.

Specifications subject to change without notice.

Online Catalogue | Fluke | FoodPro Thermometer Series | FoodPro

Items:
Value:

Find us on the following social networks:

FREE CONFIGURATION & TECHNICAL SUPPORT INCLUDED WITH MOST ORDERS
Click here for more details

FREE ISS Ltd. Mug With All Orders Over £250.00 GBP