Seneca K109PT, Temperature Transmitter for PT100 Probes

Description:

The Seneca K109PT is designed to accept a single input from a standard 2,3 or 4 wire connected PT100 probe and give a single, isolated, analogue output, easily selectable in both range and type using DIP switches.
The K109PT  with it's three-point galvanic separation between input, output and power supply can be positioned at a considerable distance up to a few hundred metres from the probe without running the risk of obtaining a measurement affected by the differences in potential or the disturbances present in the earthing circuit.
Being a K-Liner it features a super slim enclosure, just 102.5x93.1x6.2 mm. The DIN-Rail mountable K109PT offers optional K-BUS connectivity allowing further savings in time and wiring by bussing together the nominal 24V DC power supply connections. 

Specification:

• Input: Standard 2, 3 or 4 wire PT100 sensors
• Selectable input filter
• Output: Single channel current 0/4 to 20, 20 to 4/0 mA or voltage 0 to 5/10, 10 to 0, 1 to 5 Vdc
• Selectable output inversion
• Scale range “zero” selectable between -150 ºC and 0 ºC
• Scale range “span” selectable from 0 ºC to 650ºC
• Selectable Sensor Failure Detection: Upscale or Downscale
• Easy configuration using Dip Switch
• 3 port galvanic isolation between input, output and power supply
• High accuracy 14 bit resolution
• High Precision 0.1% accuracy
• Quick connection via screwless cage clamp style terminals
• Space saving super slim DIN Rail mountable enclosure, just 102.5 x 93.1 x 6.2 mm
• DIN Rail mountable
• Dual redundant power supply when used with the K-BUS
• Optional DIN rail K-BUS connection provides power to all modules with just 1 connection
• 19.2-30Vdc power supply

For additional information please refer to the documentation below which may be downloaded and printed out in "duplex" mode and folded to create a neat easy to read booklet manual