Seneca K120RTD, Transmitter for PT100 & Ni100 probes with Loop Excitation

Description:

The Seneca K120RTD is designed to accept a single input from a standard 2,3 or 4 wire connected PT100 probe or a Ni100 probe and give a single, isolated, analogue output, ideal for use with a standard 4 to 20mA loop or voltage system. Being a K-Liner it features a super slim enclosure, just 102.5x93.1x6.2 mm and is highly configurable using it's DIP Switch. The DIN-Rail mountable K120RTD offers optional K-BUS connectivity allowing further savings in time and wiring by bussing together the nominal 24V DC power supply connections.

Specification:

• Input: Standard 2,3 or 4 wire PT100 or Ni100 probe
• Selectable input filter
• Output: Single channel current 0/4 to 20, 20 to 4/0 mA or voltage 0 to 5/10, 10 to 0, 1 to 5 Vdc configurable by DIP switch
• Selectable output inversion
• Scale range "zero" selectable between -200 ºC and 0 ºC
• Scale range "span" selectable from 0 ºC to 650ºC
• Sensor Failure Detection: Upscale or Downscale
• Easy configuration using DIP Switch
• 3 port galvanic isolation between input, output and power supply
• Quick connection via screwless cage clamp style terminals
• High accuracy 16 bit Resolution
• High Precision 0.1% accuracy
• Space saving super slim DIN Rail mountable enclosure, just 102.5 x 93.1 x 6.2 mm
• Dual redundant power supply when used with the K-BUS
• Optional DIN rail K-BUS connection provides power to all modules with just 1 connection
• 19.2 -30Vdc power supply

User configuration will require the EASY-USB device (which can be purchased here) and the free EASY-SUITE software (which can be downloaded below).

For additional information please refer to the documentation below which may be downloaded and printed out in "duplex" mode and folded to create a neat easy to read booklet manual.

Click here to download the EASY LP Configuration Software v1.16