Online Catalogue | Omron | Omron Advanced Temperature Controllers |  Omron E5EN-H 1/8 DIN Advanced Temperature Controller - Standard Control

Quick Search
Main PagesHomeAbout ISSNewsServicesSupportNewsletterContact UsVacanciesHelpProduct PagesABBAOIPCALDruckElectro-SensorsElkorEurothermFlukeGefranLascarOmronProdigyRaytekSenecaShinkoStatusWest P SeriesWest N SeriesMiscellaneousClearance

Omron E5EN-H 1/8 DIN Advanced Temperature Controller - Standard Control

Online Catalogue | Omron | Omron Advanced Temperature Controllers |  Omron E5EN-H 1/8 DIN Advanced Temperature Controller - Standard Control

Omron E5EN-H 48mm x 96mm Advanced Temp Controller STANDARD

Omron E5EN-H 48mm x 96mm Advanced Temp Controller STANDARD


Price: £347.00 (Excluding VAT at 20%)

Quantity:



Control Method
Basic   
Input
Fully Universal - T/C, RTD & Linear   
Power Supply
STD 100/240 VAC   
LV 24 VDC/VAC   

Extra Functions
2x Alarm Relay/2xControl O/P slot/1-Phase Heater Burnout/Universal I/P/2x Event I/P (+£0.00)
2x Alarm Relay/2xControl O/P slot/2x SSR O/P/1x Phase Heater Burnout/Universal I/P/2x Event I/P (+£45.00)
2x Alarm Relay/2x Control O/P Slots/3-Phase Heater Burnout/Universal I/P/4 to 20mA O/P/1x Event I/P (+£35.00)
2x Alarm Relay/2x SSR O/P/3-Phase Heater Burnout/Universal I/P/4 to 20mA O/P/1x Event I/P (+£83.00)

Option Units

Output Units

FREE 12 month product support and FREE configuration included as standard



A New High-performance Controller: High Resolution, High Speed, and High Input Accuracy. Logic Operations and Preventive Maintenance Function. Plus Infrared Port on Front Panel.




  • High-resolution display with 5 digits/0.01°C display
  • Easy configuration via free cloning and setting software (USB-serial conversion cable required)
  • PV can be set to change colour in alarm (red or green)
  • High-speed sampling cycle of 60 ms
  • High Accuracy
    • Thermocouple/Pt input: ±0.1% of reading
    • Analogue input: ±0.1% FS
  • Universal inputs on all models (thermocouple, PT or analogue input) to handle various sensors with one Controller
  • Main displays can alternate between PV/SV and indicate status of auto/manual, RUN/STOP and alarms
  • Output relay operation counter enables preventative maintenance to maximise plant uptime
  • Flexible contact outputs with logic operations (AND, OR and delays) set for support software (CX-Thermo Ver. 4.0)
  • IP66 front panel
  • Removable clear terminal cover included as standard
  • Model available with position-proportional control


  • Power Supply Voltage
    • Standard - 100 to 240 VAC, 50/60 Hz (unless D in model number which signifies: 24 VAC, 50/60 Hz; 24 VDC)
  • Operating voltage range
    • 85% to 110% of rated supply voltage
  • Power Consumption
    • 100 to 240 VAC: 12 VA (max.)
    • 24 VAC/VDC: 8.5 VA (24VAC)/5.5 W (24DC)
  • Sensor Input
    • Any of the following can be selected
    • Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II
    • Platinum resistance thermometer: Pt100 or JPt100
    • Current input: 0/4 to 20mA
    • Voltage input: 0/1 to 5V, or 0 to 10V
  • Input impedence
    • Current input: 150 Ω max., Voltage input: 1 MΩ min. (Use 1:1 connection when connecting the ES2-HB)
  • Control method
    • ON/OFF control or 2-PID control (with auto-tuning)
  • Control outputs
    • Relay output
      • Output Unit (Install the Output Unit (sold seperately).)
    • Voltage output (for driving SSR)
      • Output Unit (Install the Output Unit (sold seperately).)
    • Current output
      • Output Unit (Install the Output Unit (sold seperately).)
    • Linear voltage output
      • Output Unit (Install the Output Unit (sold seperately).)
    • Built-in SSR output
      • 75 to 250 VAC, 1 A (resistive load)
    • Relay output for position-proportional control
      • Relay output: Open and close: SPST, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations min. Potentiometer input: Must be between 100 Ω and 2.5 KΩ for maximum open position
  • Auxiliary outputs
    • Number of outputs
      • 2 or 3 max.
    • Output specifications
      • Relay output: SPST-NO, 250 VAC, 3A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5V, 10mA
  • Event Inputs
    • Number of inputs
      • 2 or 4 (with an E53-AKB)
    • External contact input specifications
      • Contact input: ON: 1 kΩ max., OFF: 100 kΩ min.
      • Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.
      • Current flow: Approx. 7 mA per contact
  • Logic operations
    • Number of operations
      • 8 max. (combinations can be made using work bits
    • Operations
      • Logic operation: Any of the following four patterns can be selected. The input status may be inverted. (A and B) or (C and D), (A or C) and (B or D), A or B or C or D, A and B and C and D (A, B, C and D are four inputs.)
      • Delay: ON delay or OFF delay for the results of the logic operation given above. Setting time: 0 to 9999 s or 0 to 9999 min
      • Output inversion: Possible
    • Outputs
      • One work bit per operation
    • Work bit assignments
      • Any of the following can be assigned to up to eight work bits (logic operation results): Event input operations, auxiliary outputs or control outputs
  • Transfer Outputs
    • Number of outputs
      • 1 max. (Depends on model. Models with transfer output (F in model number)
    • Output specifications
      • Current output: 4 to 20 mA DC, Load 600 Ω max., resolution at 4 to 20 mA: Approx. 10,000
  • RSP Input
    • Number of inputs
      • 1
    • Signal type
      • Current input: 4 to 20mA (input impedence: 150 Ω ±10%)
    • Analog input scaling
      • Scaling of signal to engineering units (EU) -19,999 to 30,000 (display 30,000 max.)
    • Accuracy
      • (±0.2% of FS) ±1 digit max.
    • Input sampling period
  • 60 ms
  • Setting method
    • Set digitally using keys ont he front panel or by using the RSP input
  • Indication method
    • 11-segment digital display and individual indicators (7-segment display also possible) Character height: E5AN-H: PV: 15.8mm, SV: 9.5mm, MV: 9.5mm; E5EN-H: PV: 11.8mm, SV: 8.1mm, MV: 5.8mm. Content of 3-level display: PV/SV/MV, PV/SV/Bank No., or soak time remain. Number of digits: 5 for PV and SV, 4 for MV
  • Bank switching
    • Supported (number of banks: 8). Local SP, alarm settings, PID sets (PID constants, MV upper limit, MV lower limit etc.)
  • Other functions
    • Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout detection, 40% AT, 100% AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop, protection functions, control output ON/OFF counter, extraction of square root, MV change rate limit, logic operations, PV/SV status display, simple program, automatic cooling coefficient adjustment
  • Ambient operating temperature
    • -10 to 55°C (with no condensation or icing), for 3-year warranty: -10 to 50°C
  • Ambient operating humidity
    • 25% to 85%
  • Storage temperature
    • -25 to 65°C (with no condensation or icing)


E5AN-H
Omron E5AN-H  Dimensions
Accessories (Order seperately)

USB-Infrared Conversion Cable
E58-CIFIR
Omron E5AN USB-Infrared Conversion Cable

USB-Serial Conversion Cable
E58-CIFQ1
Omron E5CN USB-Serial Conversion Cable

Terminal Covers
E53-COV16 (Six Covers provided.)

E53-COV16 Terminal Cover

Waterproof Packing
Y92S-P5

Omron E5AN Waterproof Packing

Current transformers

E54-CT1
Omron E5CN E54=CT1 Current Transformer

E54-CT3
Omron E5CN E54=CT3 Current Transformer

E54-CT3 Accessory
Omron E5CN E54=CT3 Current Transformer Accessory

E54-CT1
Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)


Maximum continuous heater current: 50 A (50/60 Hz)
Number of windings: 400±2
Winding resistance: 18±2 MΩ
Omron E5CN E54=CT1 Current Transformer Reference Values

E54-CT3
Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)


Maximum continuous heater current: 120 A (50/60 Hz)
(Maximum continuous heater current for the Temperature Controller is 50 A.)
Number of windings: 400±2
Winding resistance: 8±0.8 MΩ
Omron E5CN E54=CT3 Current Transformer Reference Values



Application No.272
Oven Temperature Equalization for PCB Mounting Process
Use an external analog signal (4 to 20 mA) as the set point (SP). Uniform oven temperature with a total of three Temperature Controllers. Use the Temperature Controller's transfer output for zone control in electric ovens.

Application 272

Application No.278
Increased Efficiency for Bread Baking Process
Temperature settings can be registered for up to eight banks by using the bank function of the E5EN-H Temperature Controller. Easily perform external temperature settings according to the type of bread.

Application 278

Application No.332
Easy Temperature Setting with Infrared Communications Port on Front Panel
You can connect a E58-CIFIR USB-Infrared Adapter Cable between the USB port on a computer and the infrared peripheral port on the front of the E5EN-H. This allows you to easily set the temperature from the front panel without the loss of the dustproof, drip-proof structure.

Application 332

Application No.333
Low-cost Program Control of Industrial Furnaces
One E5EN-H Temperature Controller can perform simple program control for 16 steps.
You can start programs with event inputs.
You can monitor the current bank number or remaining soak time on the three displays.
Application 333

Application No.335
Improves Control Performance in Hydraulic Control of Metal Processing Machines and Other Equipment
High-speed response of 60 ms is possible.
Robust tuning calculates the ideal PID control constants.
The PID automatic selection function automatically switches PID control for temperature controls that are set in advance. This greatly improves temperature control performance.
Application 335

Application No.336
Low-cost Position-proportional Control for Brewing Equipment
Control of control valves is possible with the E5EN-H Temperature Controller with position-proportional control. This enables a low-cost position-proportional control system.
Application 336



Controllers

Omron E5EN-H

1. Type
H: Advanced

2. Control Method
Blank: Standard or heating/cooling control
P: Position-proportional control

3. Control Output 1
A: Control Output Unit
R: Relay Unit
S: SSR Output

4. Control Output 2
A: Control Output Unit
R: Relay Unit
S: SSR Output

5. Auxillary Outputs
2: Two outputs
3: Three outputs

6. Option 1
Blank: None
H: Heater burnout/SSR failure/ Heater overcurrent detection (CT1)
HH: Heater burnout/SSR failure/Heater overcurrent detection (CT2)

7. Option 2
B: Two event inputs
BF: Event input + Transfer output

8. Option 3
M: Option Unit can be mounted

9. Power Supply Voltage
Blank: 100 to 240 VAC
D: 24 VAC/VDC

11. Terminal Cover
-500: With Terminal Cover

Option Units

Omron E5EN-H

1. Function
EN01: RS-232C communications
EN02: RS-422 communications
EN03: RS-485 communications
AKB: Event input

Output Units

Omron E5AN

1. Control Output
R: Relay output
Q: Voltage output (for driving SSR)
Q3 Voltage output (for driving SSR) + 24 VDC (NPN)
Q4: Voltage output (for driving SSR) + 24 vdc (PNP)
C3: Current output + 4 to 20 mA DC
C3D: Current output + 0 to 20 mA DC
V34: Linear voltage output + 0 to 10 VDC
V35: Linear voltage output + 0 to 5 VDC
2. Version
Blank: Available for E5AN-E5EN-H and E5AK/E5EK
N: Available only for E5AN-H/E5EN-H



All the documentation for the E5EN-H will be available to download soon. Sorry for any inconvenience caused.

Omron E5AN-H/E5EN-H Datasheet (29/07/2011)
Click here to download theOmron E5AN/E5EN datasheet in PDF format  

Omron E5_N-H Series Communications Manual
Click here to download the Omron E5_N-H series communications manual in PDF format  

Online Catalogue | Omron | Omron Advanced Temperature Controllers |  Omron E5EN-H 1/8 DIN Advanced Temperature Controller - Standard Control

CheckoutView Cart

Items:
Value:

Clearance Sale

Find us on the following social networks:

Like us on FacebookFollow us on TwitterFollow us on Linkedin

FREE CONFIGURATION & TECHNICAL SUPPORT INCLUDED WITH MOST ORDERS
Click here for more details

FREE ISS Ltd. Mug With All Orders Over £100.00 GBP