Omron E5GN 1/32 DIN Basic Temperature Controller

PV can be set to change colour (choice of 3) in alarm
High Accuracy

Thermocouple input: ±0.3% of reading
Pt input: ±0.2% of reading
Analogue input: ±0.2% FS

Main displays can alternate between PV/SV and indicate status of auto/manual, RUN/STOP and alarms
Output relay operation counter enables preventative maintenance to maximise plant uptime
Compatible with Support Software (CX-Thermo version 4.2 or higher)
Eleven-segment displays
Models are available with one or two alarm inputs

Power Supply Voltage

Standard - 100 to 240 VAC, 50/60 Hz (unless D in model number which signifies: 24 VAC, 50/60 Hz; 24 VDC)

Operating voltage range

85% to 110% of rated supply voltage

Power Consumption

100 to 240 VAC: 5.5 VA (max.)
24 VAC/VDC: 3 VA/2 W (max.)

Sensor Input

Models with temperature inputs
Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II
Platinum resistance thermometer: Pt100 or JPt100
Infrared temperature sensor: 10 to 70°C, 60 to 120°C, 115 to 165°C, or 140 to 260°C
Voltage input: 0 to 50 mV
Models with analogue inputs
Current input: 0/4 to 20mA
Voltage input: 0/1 to 5V, or 0 to 10V

Input impedence

Current input: 150 Ω max., Voltage input: 1 MΩ min. (Use 1:1 connection when connecting the ES2-HB)

Control method

ON/OFF control or 2-PID control (with auto-tuning)

Control outputs

Relay output

SPST-NO, 250 VAC, 2 A (resistive load), electrical life: 100,000 operations, mininum load: 5V, 10mA

Voltage output (for driving SSR

Output voltage: 12 VDC ±15% (PNP), max. load current: 21 mA, with short-circuit protection circuit

Current output

4 to 20mA DC/0 to 20mA DC, load: 500 Ω max., resolution: approx. 10,000

Auxiliary outputs

Number of outputs

1 or 2 max (Depends on model

Output specifications

Relay output: SPST-NO, 250 VAC, 2 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5V, 10mA

Event Inputs

Number of inputs

External contact input specifications

Contact input: ON: 1 kΩ max., OFF: 100 kΩ min.
Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.
Current flow: Approx. 7 mA per contact

Setting Method

Digital setting using front panel keys

Indication method

11-segment digital display and individual indicators (7-segment display also possible) Character height: PV: 7.5mm, SV: 3.6mm

Multi SP

Up to four set points (SP0 to SP3) can be saved and selected using event inputs, key operations or serial communications

Bank switching

Not supported

Other functions

Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout detection (including SSR failure and heater overcurrent detection), 40% AT, 100% AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop, protection functions, control output ON/OFF counter, extraction of square root, MV change rate limit, logic operations, PV/SV status display, simple program, automatic cooling coefficient adjustment

Ambient operating temperature

-10 to 55°C (with no condensation or icing), for 3-year warranty: -10 to 50°C

Ambient operating humidity

25% to 85%

Storage temperature

-25 to 65°C (with no condensation or icing)

Models with Screw Terminal Blocks
Omron E5GN Screw Terminal Modules Dimensions

Models with Screwless Clamp Terminal Blocks
Omron E5GN Screw Terminal Modules Dimensions

Accessories (Order seperately)

USB-Serial Conversion Cable
E58-CIFQ1
Omron E5CN USB-Serial Conversion Cable

Waterproof Packing
E53-COV17

Order the Waterproof Packing separately if it becomes lost or damaged.
The Waterproof Packing can be used to achieve an IP66 degree of protection.
(Deterioration, shrinking, or hardening of the waterproof packing may occur depending on the operating environment. Therefore, periodic replacement is recommended to ensure the level of waterproofing specified in IP66. The time for periodic replacement depends on the operating environment. Be sure to confirm this point at your site. Consider one year a rough standard. OMRON shall not be liable for the level of water resistance if the customer does not perform periodic replacement.)
The Waterproof Packing does not need to be attached if a waterproof structure is not required.

Omron E5GN Waterproof Packing

Current transformers

E54-CT1
Omron E5CN E54=CT1 Current Transformer

E54-CT3
Omron E5CN E54=CT3 Current Transformer

E54-CT3 Accessory
Omron E5CN E54=CT3 Current Transformer Accessory

E54-CT1
Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)

Maximum continuous heater current: 50 A (50/60 Hz)
Number of windings: 400±2
Winding resistance: 18±2 MΩ
Omron E5CN E54=CT1 Current Transformer Reference Values

Omron E5CN E54=CT1 Current Transformer Reference Values

E54-CT3
Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)

Maximum continuous heater current: 120 A (50/60 Hz)
(Maximum continuous heater current for the Temperature Controller is 50 A.)
Number of windings: 400±2
Winding resistance: 8±0.8 MΩ
Omron E5CN E54=CT3 Current Transformer Reference Values

Omron E5CN E54=CT3 Current Transformer Reference Values

Application No.275
Operation/ Control Panel Downsizing
Reduce panel usage from 1/2 to 1/4 by using the E5GN Temperature Controller, K3GN Digital Panel Meter, and H8GN Electronic Timer/Counter.
Operation/Control Panel Downsizing

Controllers

Omron E5CN

1. Control Output 1
R: Relay output
Q: Voltage Output (for driving SSR)
C: Current output

2. Auxillary Outputs *2
Blank: None
1: One output
2: Two outputs

3. Option
Blank: None
01: RS-232C Communications
03: RS-485 Communications
B: Two event inputs
H: Heater burnout/Heater short/Heater current detection (CT1)

4. Input Type
T: Universal thermocouple/platinum resistance thermometer input
L: Analogue current/voltage input

5. Power Supply Voltage
Blank: 100 to 240 VAC
D: 24 VAC/VDC

7. Case Colour
Blank: Black

8. Terminal Cover
Blank: None
FLK: CompoWay/F Communications

Omron E5GN 1/32 DIN Basic Temperature Controller

Omron E5GN 48mm x 24mm Basic Temperature Controller

Price: £116.00 (Excluding VAT at 20%)