Status SEM1000 4 to 20 mA Loop Isolator

The SEM1000 isolator is designed to be series connected into a new or existing (4 to 20) mA current loop and provide an isolated (4 to 20) mA signal capable of driving into 500 Ω maximum load. The output is powered from the input loop.

This isolator requires no user adjustment during commissioning. Minor adjustments can be made to the calibration of the device by means of the two front panel accessible calibration potentiometers.

Incorrect connection in the loop will not damage the device as long as the specified maximum currents/voltages are not exceeded.

Standard Features

• Loop Powered
• (4 to 20) mA Output
• Galvanic Isolation 500 V DC Flash Tested 1 KV
• High Accuracy 0.05%
• 12.5 mm Wide
• 10 YEAR WARRANTY
• High reliability

Downloads

For full specification, please refer to the following documentation.