Status SEM161W/H Programmable Wall Mount Humidity / Temperature Transmitters

The SEM161W/H is a "smart" wall mount humidity transmitter sensor with a single two wire (4 to 20) mA output. The design uses a digital sensor which plugs into the sensor stem. A 4 digit display option is also available.

The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, PC configuration allows you to measure any one of these 4 parameters on the SEM161.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.

The product default setting is 0 to 100% RH. If you wish to re configure the product yourself, then the hardware needed is shown in our configuration category.

Standard Features

• Measures humidity, temperature, dewpoint or delta t
• Single channel 4/20mA output for any one of the above
• Programmable using USB powered configurator
• Wall mount version
• Display option
• Interchangeable digital sensor
• Immersion length of 110mm

Options

4-Digit display option also available. Plesae specify using the radio buttons above.

Downloads

For full specification, please refer to the following documentation.