Status SEM162R/H Programmable Remote Mount Humidity / Temperature Transmitters

The SEM162R/H is a "smart" remote mount humidity transmitter with 2 x (4 to 20) mA two wire outputs. The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, PC configuration allows you to output any 2 of these 4 parameters.

The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, PC configuration allows you to measure any one of these 4 parameters on the SEM161.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.

The product default setting is 0 to 100% RH. If you wish to re configure the product yourself, then you will need the Status USB Kit.

Standard Features

• Measures humidity, temperature, dewpoint or delta t
• Dual channel 4/20mA output for any two of the above
• Programmable using USB powered configurator
• Remote mount version
• Display option
• Interchangeable digital sensor

Options

• Immersion Length:
• HP 01- 2m
• HP 02- 5m

4-Digit display option also available. Plesae specify using the radio buttons above.

Downloads

For full specification, please refer to the following documentation.