Seneca Z-Line Signal Isolators and Converters

The Seneca Z102 module is designed to receive a single channel potentiometer 2 wire input which is then isolated and converted to a standard single channel Current or Voltage output.

The Seneca Z109REG Universal Isolating Converter and Transmitter is designed to receive a single channel input which can either be a Current, Voltage, Thermoresistance, Thermocouple, or Potentiometer input which is then isolated and converted to a standard Current or Voltage output.

The Seneca Z109REG-ER Universal Isolating Converter and Transmitter is designed to receive a single channel input which can either be a Current, Voltage, Thermoresistance, Thermocouple, or Potentiometer input which is then isolated and converted to a standard Current or Voltage output. The Z109REG-ER is distinguished by its configurable square root extraction capabilities making it ideal for "flow" type applications.

The Seneca Z109REG-2 Isolating Converter and Transmitter can receive a single channel Voltage, Current, RTD, Thermocouple, Rheostat, or Potentiometer input which is then isolated, converted or amplified to a standard Voltage, Current or SPST relay output. The unit is PC programmable and features Strobe input capability making it a ideal multiplexing units.

The Seneca Z109REG-2-ER Isolating Converter and Transmitter (with square root extraction) can receive a single channel Voltage, Current, RTD, Thermocouple, Rheostat, or Potentiometer input which is then isolated, converted or amplified to a standard Voltage, Current or SPST relay output. The unit is PC programmable, features optional Strobe input capability making it an ideal multiplexing unit, the Z109REG-2-ER also has a square root extraction function making it ideal for "flow" type applications.

The Seneca Z109 V-I is a single channel Voltage to Current Isolating Converter.

The Seneca Z109 V-I is a single channel Voltage to Current Isolating Converter.

The Z109S Loop Power Supply is designed to power any 0 or 4 to 30mA loop.
The Z109S provides full three port isolation, ensuring the loop, the power supply are isolated from each other and its detachable "plug in" screw terminal ensures a trouble free installation of the device.

The Seneca Z110S is designed to receive a single channel Current input and generates an isolated Current output signal avoiding any potential interference associated with a non isolated signal. Self powered by it's input loop the Z110S does not require any auxiliary power supply making it easy to retro fit as a problem solver.

The Seneca Z110D is designed to receive up to two channels Currents inputs and generates isolated Current signals as an output avoiding any potential interference associated with a non isolated signal. Self powered by its input loop the Z110D does not require any auxiliary power supply making it easy to retro fit as a problem solver.

The Seneca Z201 is designed to receive a single channel Alternate Current and generates an isolated single channel Voltage output.

The Seneca Z202 is designed to receive a single channel alternate Voltage and generates a single channel isolated Current or Voltage output.

The Seneca Z-SG Strain Gauge Converter is designed to accept a 6 Wire Input from a Load Cell which is then isolated and retransmitted as a standard Analogue signal (mA/V) Output.

The S203TA is a complete three-phase network analyser suited for use with up to 600V AC voltage range, and current range given by the nominal range of the CTs with 5AOutput connected. The instrument provides all the following electrical measurable quantities: Vrms, Irms, Watt, Var, Va, Frequency, Cos and Active Energy.