Shinko ACS-13A Series Digital Indicating Controller

Online Catalogue | Shinko | Shinko Digital Controllers | Shinko ACS-13A Series Digital Indicating Controller

Shinko ACS-13A

Price: £116.00 (Excluding VAT at 20%)

Quantity:

Control Output 1

R - Relay (1A) (+£0.00)

S - SSR (12V Logic) (+£0.00)

A - Linear (4-20mA) (+£10.00)

Power Supply

- 110/240Vac Supply Option (+£0.00)

1 - 24Vac Supply Option (+£20.00)

Product Option 1

Product Option 2

Heater Burnout Alarm (Not Available with Heat/Cool)

FREE 12 month product support and FREE configuration included as standard

Features

• Compact, Space saving - The short, 56mm depth of the ACS-13A will help to save space in the control panel area. When gasket (Dust-proof, Drip-proof, IP66) is used, the depth will be 54.5mm

• 11-segment LCD display - Improves readability

• An easier viewing display PV colour switchable - The PV display colour can be red, green or orange. The PV display colour can also change depending on deviation between PV and SV, this allows easy and distinct checking of control status.

• Standard console connector equipped - By connecting to a PC with USB port, various settings and monitoring can be conducted using the Console software (SWS-ACS01M)

• Standard Output rate of change limit - This is suitable for heaters which are not designed for sudden changes in output. This is suited for controlling heaters such as the Kanthal Super.

• Multi-input ºC - 18 types of input such as thermocouple (10 types), RTD (2 types), DC current (2 types) and DC voltage (4 types) are supported. The ACS-13A can perform temperature control for various machines such as injection molders, extruders, packagers, bag makers, dryers and electric furnaces.

• High-speed sampling - A fast 0.25 second sampling period allows applications for various processes.
• Multiple options

    Set value memory external selection - SV1 to SV4 can be selected by external contact. Control output OUT/OFF function or Auto/Manual control function is selectable.

    Serial communication - Shinko protocol, Modbus ASCII and Modbus RTU can be used.
    Heater burnout alarm output - Single phase or 3-phase heater burnout or deteoration can be detected. For 3-phase, 2 pieces of CT are connected.

    Heating/Cooling control output - One cooling action is selectable from: Air cooling (linear characteristic), oil cooling (1.5th power of the linear characteristic), water cooling (2nd power of the linear characteristic). For cooling output type, relay contact or non-contact voltage output are usable.

Dimensions

External Measurements (Units: mm)

Shino ACS External Dimensions