Cancel

907BV Select Options

£316.43

approx €373.70

You need to select 1 option(s) for this product before ordering. You can select from the options below, or enter the part number (show tutorial)

Part #

7750061

Model

Vertical alignment, Explosion proof, Bidirectional, 10' cable

Change

Vertical alignment, Explosion proof, Bidirectional, 100' cable

+ £301.37

Change

Horizontal alignment, Explosion proof, Bidirectional, 10' cable

+ £90.41

Change

Vertical alignment, Explosion proof, Bidirectional, 50' cable

+ £180.82

Change

You need to select 1 option(s)

You need to select 1 option(s) for this product before ordering

All required options have been selected. You're almost there!

Save & Select Quantity

Copy to clipboard

Save as preset (Coming soon)

The option combination you selected is not available.

Check Available Models

Overview

907 XP sensors are used in applications requiring hazardous location ratings, or in applications where the sensor may be subject to abuse. It has a 1-inch NPT conduit opening for wiring, terminal strip for wiring, and is provided with a mounting bracket and 10 ft of cable. The quadrature (bidirectional) option has two sensors and is designed for applications requiring both speed and direction information. Specify vertical alignment when the magnets will pass vertically in front of the sensor face, and horizontal alignment when the magnets will pass horizontally in front of the sensor face.

These speed sensors use magnet-sensing Hall Effect IC's to produce a digital pulse signal to interface with speed switches, tachometers, counters, signal conditioners, or PLC's. Hall Effect sensors provide true zero speed operation with square-wave output and immunity to electrical noise.